Hyundai Translead is the only manufacturer to offer hot-dipped galvanizing of the complete chassis frame and components as an enhanced option to further protect against corrosion.
Ease of access & repair of 7-way harness and gladhands
All steel parts are shot-blasted and coated with zinc epoxy primer, before fabrication and after welding
Air and electrical lines protected with automotive wire loom for optimal wire protection
STANDARD FEATURES
■ High-strength alloy steel construction for extra strength and durability
■ 22.5” radial tires
■ LED lights
■ All steel parts are shot-blasted and coated with zinc epoxy primer, before fabrication and after welding
■ Ease of access & repair of 7-way harness and gladhands
■ Heavy duty diagonal bracing in center and suspension areas
■ Sealed wiring harness with integral ground
■ Complies with AAR & NHTSA regulations and TTMA recommendations
■ 3-1/8“ or 4-3/4” Gooseneck height
53’ GOOSENECK STANDARD SPECIFICATIONS
Overall Length 53’ 8”
Overall Width 96”
King Pin Setting 36”
Capacity 67,200 lbs
Tare Weight 7,700 lbs
GVWR 74,900 lbs
Main Beam High tensile steel, hot rolled 12” x 16 lbs/ft H-beam
Gooseneck Fabricated “I” Beam with 5/8“ top & bottom flanges and 5/16” web, all GR80
CrossmembersFabricated channel with gussets integrated, every other crossmembers and diagonal braces throughout rear bolster to landing gear section
Upper Coupler All high tensile steel construction with AAR Certified cruciform style king pin. All interior walls of closed sections coated for superior corrosion protection
Front Bolster 8”W x 10”H x 3/16” thickness GR80 “U” channel with two locking pins
Rear Bolste88”W x 7-7/8“H x 3/16” thickness “U” channel & 5/16“ thickness top plate, all GR80 with two non-retractable twist lock
Landing Gear50,000 lbs capacity with heavy-duty low profile sand shoe
Rear Impact Guard4” horizontal step “U” channel designed and tested to conform to Federal Motor Vehicle Safety Standards (FMVSS)
SuspensionHutchens overslung spring hangers with three leaf springs
Wheel & DrumsHeavy duty, 16-1/2” x 7” outboard mounted brake drums with 8-1/4” x 22-1/2” hub piloted disc wheels
Tires11R22.5 14 PLY(G)
Axles5” round, 22,500 lbs rating, 71-1/2” track with 16-1/2” x 7” non-asbestos brake lining
Brakes2S-1M ABS brake system. Complies with FMVSS 121
Lights & Wiring12 volt sealed system with molded connectors to fit sealed LED lamps
PaintAll steel parts shot-blasted, coated with a zinc epoxy primer and finished with urethane topcoat
MarkingsCustomer and conspicuity markings installed per latest Federal Safety Standards
Buzznerd Trucks